pix

CuteLink Product

Trust our experience to build your network

An Innovative Access Solutions & Equipments Provider

MSAP MSTP SDH,PDH Optimux Multiplexer,Fiber Modem,EOP Protocol Converter,PCM,TDM Over IP,EOC Cable Modem,GPON&EPON OLT&ONU,PTN CPE Access Devices,IP-OAM Devices

Your Location: Home >> CuteLink Products

Product Name 4/8/16E1 PDH Multiplexer
Product Model CL-FOM401/FOM801/FOM1601
Overview:
CL-FOM400,401,801, 1601,401B,801B, 1601B, 4,8,16E1 PDH (Plesiochronous Digital Hierarchy) which was used in exchanger for long distance transmission, and platform of mobile telecommunication, pager transmission station ect., which was used in mini-medium column and point to point products with fiber supporting, the equipment adopted powerful function and expert digital repeating-connection chips which integrated all digital and logical function in the equipment so that improved the performance and reduced the cost of products, the completed-equipment with good performance, stable operation, low loss, strong integration capacity, small bulk, easy installation and maintenance. Standalone and Rack mount module are both available.
 
Feature:
1. The standard E1 interfaces comply with ITU-T G.703, G.823 and G.742.
2.Favorable optic/electric specification provided by integral optic reception/transmission module
3.Offering 4,8,16E1 (2.048Mbps) interfaces
4.E1 Line code: compliant to G.703, E1 interface adopt digital phase locked and clock extracted technique
5.An official phone interface is optional, not occupy E1 channel
6.Offering an asynchronous data-transmitting RS232 interface and a management RS232 interface
7.Perfect alarm function display remote status
8.up to 120Km distance without repeater
9.Complete alarming function
10.Single-board architecture design
11.100~220V Ac and -48VDC power supply is optional.
12.Support  Cutelink EasyPDH SNMP Network manager system
 
 
     4/8/16E1 PDH Multiplexer
                            CL-FOM401B 4E1+Rs232+OW SNMP PDH Mux New Version
 
CL-FOm400 4/8/16E1 PDH Multiplexer
                    CL-FOM401 4E1+Rs232+OW  PDH Mux  Old Version
 
Specification:
Power
AC Input
100~270V
DC Input
-48V
Power Consumption
3W
E1 interface
Compliance with ITU-T G.703
Data rate
2.048Mbps
Impedance
75ohm(BNC)/120ohm(BLANCE)
Line Code
HDB3
Frequency deflection
2.048MHz 100PPM
Jittering
Compliance with ITU-T G.742, G.823
Fiber interface
Rate
155Mbps
Line code
1B1C
Wavelength
850nm/1310nm/1550nm
Connector
FC/SC
Distance
0-120Km
Environment
Operation Temperature
0~50O
Operation Relative Humidity
20~90%
Store Temperature
-20~65
Store Relative Humidity
10~95%

CuteLink EasyPDH SNMP NMS System
 
Application:
4/8/16E1 PDH Multiplexer solution
 
 
Order Info.:
Model 
Description
CL-FOM400
4E1 to Fiber Standalone PDH MUX, 4E1 75/120ohm, Unframe, Optical Interface 20-40km, 1310nm, AC+DC
CL-FOM401
4E1 to Fiber 19'inch PDH MUX, 4E1 75/120ohm, Unframe,Optical Interface 20-40km, 1310nm, 1*RS232, AC+DC
CL-FOM801
8E1 to Fiber 19'inch PDH MUX,8E1 75/120ohm, Unframe, Optical Interface 20-40km, 1310nm,  1*RS232,AC+DC
CL-FOM1601
16E1 to Fiber 19inch PDH MUX, 16E1 75/120 ohm, Unframe, Optical Interface 20-40km, 1310nm, 1*RS232, AC+DC
CL-FOM401B
4E1 to Fiber 19'inch PDH MUX, 4E1 75/120ohm, Unframe,1+1 Backup Optical Interface 20-40km, 1310nm, OW, SNMP NMS, 1*RS232, AC+DC
CL-FOM801B
8E1 to Fiber 19'inch PDH MUX,8E1 75/120ohm, Unframe, 1+1 Backup Optical Interface 20-40km, 1310nm, OW, SNMP NMS, 1*RS232,AC+DC
CL-FOM1601B
16E1 to Fiber 19inch PDH MUX, 16E1 75/120 ohm, Unframe,1+1 Backup Optical Interface 20-40km, 1310nm, OW, SNMP NMS, 1*RS232, AC+DC