pix

CuteLink Product

Trust our experience to build your network

An Innovative Access Solutions & Equipments Provider

MSAP MSTP SDH,PDH Optimux Multiplexer,Fiber Modem,EOP Protocol Converter,PCM,TDM Over IP,EOC Cable Modem,GPON&EPON OLT&ONU,PTN CPE Access Devices,IP-OAM Devices

Your Location: Home >> CuteLink Products

Product Name£º Ethernet Over SDH(EOS)
Product Model£º CL-EOS
Device Overview
CL-EOS Series take SDH technology as its core to provide access, provide broadband IP service, realize access and convergence faced with broadband data application, and is a device for comprehensive access conversion in the applications between Ethernet access services and SDH load-carrying net.
The devices is supplied with 2 interfaces, STM-1 interface (network interface) and 100M Ethernet and 1000M Gigabit Ethernet interface (user interface), Ethernet data frames from access network received by Ethernet interface is converted STM-1 SDH frames, and conveyed to SDH rig net through STM-1 interface. Whole communication is realized through convergence and data receiving on the opposite terminal.
Providing sound level ensured data transmission service, module designed for complete device, STM-1 interface and Ethernet interface can be optional for electrical or optical port.
Typical applications include IP DSLAM backhauling, enterprise connectivity, and high-bandwidth private line services¡£
CL-EOS-01/02/03/04-M Ethernet Over STM-1 SDH Multiplexer
Device Feature
    Providing one  STM-1 interface (optical/ electrical)  and one FE interface£¨optical/ electrical£©and Gigabit Ethernet interface£¨optical/ electrical£©£¬hot swap for all daughter boards, convenient for maintenance and replacement.
    CL-EOS carries potted Ethernet services via VC-4 in SDH£»
    CL-EOS provides very low time delay and delay jitter(within 10¦Ìs), supporting real-time data transmission QOS£»
    Modular design, compact conformation (19 inch 1U )£¬desktop or rack mounted£»
    Optional configuration for power supply£ºAC220V¡¢DC-48V , single power supply¡¢AC220V &DC-48V and redundancy power supply or
    Supporting remote fault alarm and power monitoring, hot swap for power module£»
    NMS type device, supporting SNMP based on Ethernet interface, supporting third party MIB  browser  management, supporting Ethernet graphical management software,
    supporting RS232 hyper terminal management£¨TL1 command line£©£»
    Independent installation and start for NMS software and hardware, NMS fault and line up NMS with business will not affect the normal business£¬
 
Specification
1. STM-1  optical card
Optical Rate        155520kbit/s(STM-1£¬G.957,  frame structure G.707)
Interface code      Compliance with code in G.957
Digital signal      compliance with  G.707,G.958
Light source        LD
Output optical power      ¡Ý£­9dBm£¨single mode£©
Receiver type      PINFET
Receiving sensitivity     ¡Ü£­35dBm£¨BER¡Ü10-11£©£¨single mode£©
Optical connector type    FC / SC / ST
Center wavelength        single mode 310 / 1550 nm   multimode 850nm
Transmission distance    0¡«40km (40¡«100km  customerized )
STM-1 electrical Interface board
Bit rate                 155520kbit/s
Interface code type        CMI
Digital signals            G.707
consumption        12.7dB£¬transmission distance of 75¦¸ copper coaxial cables is around 80 meters. 
Ethernet Optical card
Interface type        100M Base-FX
Interface standard    compliance with IEEE802.3 100 Base-FX
transmission code       100Mbps
light source            LD
output optical power      ¡Ý£­9dBm£¨single mode£©
receiver type      PINFET
Receiving sensitivity      ¡Ü£­35dBm£¨BER¡Ü10-11£©£¨single mode£©
Optical connector type    FC / SC/ST
Center wavelength        single mode 1310 / 1550 nm   multimode 850nm
Transmission distance    0¡«40km (40¡«100km customerized)
Ethernet Electrical Card
User type£ºRJ45  10 /100/1000M Base-T
Interface standard£ºcompliance with IEEE802.3   10/100M Base-T
Transmission code£º10/100M  1000M Gigabit
Power Supply
Input voltage         AC220V&DC- 48V
Voltage fluctuation    165VAC¡«265VAC or £­36VDC¡«£­72VDC
consumption       £¼15W
mechanical parameter  
standalone£¨19¡å£©
external dimension  440mm(W)¡Á43.5mm(H)¡Á245mm(D£¬including ground terminal)
weight         <5.0 kg
chassis type         EIA 19¡å
Environment
The device¡¯s operating temperature covers wide range and it can work stably under extreme environment
Operating temperature       0¡æ ¡« +45¡æ
Storage temperature       £­20¡æ ¡« +70¡æ
Relative humidity      10 %¡«95 %
Atmospheric pressure       70 ¡«106 kpa
Free from corrosive and solvent gases, flying dust, and interference of strong magnetic field
 
Application
CL-EOS-01/02/03/04-M Ethernet Over STM-1 SDH Multiplexer solution
 
 
Order Info.
Model
Description
CL-EOS-01-M
STM-1/Ethernet£¨FE£©Network Bridge£¬Interface£º1 STM-1optical interface£¬acc.to G.664standard£¬SC/PC single mode 20Km£»User interface£º1 Ethernet electrical port£¨100M,RJ45£©,AC+DC ,SNMP
CL-E0S-02-M
STM-1/Ethernet£¨FE£©Network Bridge£¬Line interface£º1 STM-1 electrical port£¬acc.to G.707standard£»User interface£º1 Ethernet optical port ,acc.to IEEE802.3 100M Base-FX standard SC/PC single mode 20Km, AC+DC ,SNMP
CL-E0S-03-M
STM-1/£¨FE£©£¬line interface£ºone STM-1 optical interface£¬compliance with standard G.664£¬SC/PC single mode 20Km £»User interface£ºone Ethernet optical interface, AC+DC ,SNMP
CL-E0S-04-M
STM-1/£¨FE£©£¬line interface£ºone STM-1 electrical interface£¬transmission distance of 75¦¸ copper coaxial cables is around 80 meters£»User interface£ºone Ethernet electrical interface,  AC+DC ,SNMP
 
CL-EOS-GE01-M
STM-1/Ethernet£¨FE£©Network Bridge£¬Interface£º1 STM-1optical interface£¬acc.to G.664standard£¬SC/PC single mode 20Km£»User interface£º1 Ethernet electrical port£¨1000M,RJ45£©,AC+DC ,SNMP
 
CL-EOS-GE02-M
STM-1/Ethernet£¨FE£©Network Bridge£¬Line interface£º1 STM-1 electrical port£¬acc.to G.707standard£»User interface£º1 Ethernet optical port ,acc.to IEEE802.3 1000M Base-LX/SX SFP, AC+DC ,SNMP