pix

CuteLink Product

Trust our experience to build your network

An Innovative Access Solutions & Equipments Provider

MSAP MSTP SDH,PDH Optimux Multiplexer,Fiber Modem,EOP Protocol Converter,PCM,TDM Over IP,EOC Cable Modem,GPON&EPON OLT&ONU,PTN CPE Access Devices,IP-OAM Devices

Your Location: Home >> CuteLink Products

Product Name£º 2/4/8/16E1 to Ethernet Protocol Converter
Product Model£º CL-C4200
Overview:
CL-C2200,4200,8400,1600 Protocol converter is a high-performance, self-learning distant Ethernet Bridge with small size and low cost, which makes it suitable for cost-sensitive bridge connection as the LAN stretcher or separator based on the bite flow. It can study MAC destination address from the connected LAN constantly and determine whether forward or filter according to destination Mac address of data frames. Standalone and Rack mount module are both available.
 
Feature:
1.  Converts signals between (1~16) E1 interface and Ethernet interface and transmits video, voice, data and so on with  Max. Bandwidth 7.968Mb
2.  E1 channels (from channel 1 to channel 16) are used to transparently transmit data at 10M/100M.
3.  Ethernet ports supports Vlan
4.  Ethernet interface supports 5 kinds of setmode: 10MFDX, semiduplex, 100MFDX, 100M semi duplex and auto-negotiation.
5.  When Ethernet data transmitted, frames are reordered in the E1 channel so as to assure frames¡¯ order effectively and improve the transmission rate.
6.  It allows that the max. Transmission difference of frames¡¯ order between each two E1 channel can be 16 ms, which can assure it be used stably and reliably in each complicated network.
7.  When transmitting Ethernet data, attenuation of bandwidth of eachE1 channel is only 64kbps and the actual effective bandwidth is 1.984Mbps.
8.  Check the available channel from channel 1 to channel 16 automatically and distribute bandwidth automatically.
9.  Two Ethernet interfaces can be exchanged.
10. When a receiving direction of any E1 link receives alarms about LOS, AIS and LOF, the corresponding sending direction will not be influenced. So asymmetry transmission is materialized over E1 link.
11. Supports SNMP.
 
Specification:
Power
AC Input
100~240V
DC Input
-48V
Power Consumption
¡Ü3W
E1 interface
Data rate
7.968Mb
Code type
HDB3
Compliant with G.703, G.704, G.706 and G.823 75/120 BNC (75ohm)/RJ45 (120ohm)Data rate
Ethernet Interface
Standard
IEEE 802.3, 802.3u.10/100M electrical Port, MDI/MDIX auto negotiation, Half/ full duplex
Qty
2*RJ45 connector
Environment
Operation Temperature
0~50O
Operation Relative Humidity
20~90%
Store Temperature
-20~65
Store Relative Humidity
10~95%
Application:
 
 
Order Info.:
Model 
Description
CL-C2200
2*10/100M Base-T to 2E1, 75/120ohm, framed,AC220V+DC-48V(2 Ethernet ports,2E1 Ports)
CL-C4200
4*10/100MBase-T to 4E1, 75/120ohm, framed,AC220V+DC-48V(4Ethernet ports,4E1 Ports)
CL-C8400
4*10/100M to 8E1, 75/120ohm, framed,AC220V+DC-48V
(4 Ethernet ports,8E1 Ports)
       CL-C16200 4*10/100M to 16E1, 75/120ohm, framed,AC220V+DC-48V
(4Ethernet ports,16E1 Ports)