E1 to Ethernet Protocol Converter-CuteLink An Innovative Access Solutions & Equipments Provider

CuteLink Product

Trust our experience to build your network

An Innovative Access Solutions & Equipments Provider

MSAP MSTP SDH,PDH Optimux Multiplexer,Fiber Modem,EOP Protocol Converter,PCM,TDM Over IP,EOC Cable Modem,GPON&EPON OLT&ONU,PTN CPE Access Devices,IP-OAM Devices

Your Location: Home >> CuteLink Products

Product Name：	E1 to Ethernet Protocol Converter
Product Model：	CL-C1200/C1100

Overview:

CL-C1200L/C1200/C1400/C1100/C1101 FE1 to 10/100Base-Tx/Fx Ethernet Protocol Interface Converter is an Ethernet bridge of high performance, which accomplishes the converting between the 100M Ethernet port and the E1 port. It can automatically learn the MAC addresses in the linked LAN continuously, and transmit the aim address to frame in another LAN. There are up to 10,000 addresses in its LAN sheet, which can be updated automatically. The maximum rate of transmitting and filtrating is 30,000 frame/second (line speed), with the buffer capable to contain 256 frames and waiting throughput 1 frame. Specified time slot can be extracted from G.703 E1 at discretion to compose the data channel for N*64K (N=0~31).The device is furnished with LCD display panel, on which both check and configuration can be fulfilled through operational keys. As an extended device of the Ethernet, the FE1-10/100BASE-TX Bridge realizes interconnection of two Ethernet by using the E1 channel provided by existing networks with low cost..

Feature:

1.IEEE 802.3 Ethernet, ITU-T G.703, G.704 and G.823 protocols.

2.E1 interface framed/unframed optional; balanced 120ohm/ unbalanced 75ohm optional.

3.The E1 interface uses PCM31 mode, supporting CRC check.

4.E1 interface main/ slave clock optional in the framed mode.

5.In the E1 framed mode, the number of time slots is optional from 1 to 31.

6.Supports 2.048Mbps transparent transmission in the E1 non-framed mode.

7. The 10/100Base-T Ethernet interface supports 10/100M half/ full duplex modes.

8. MAC address self-learning and address filtering functions, to reduce the transmission load of the E1 circuit.

9. Built-in 64Mbits SDRAM Ethernet data buffer memory, improve the capability of Ethernet side anti-outburst, assure high throughput of data transmission.

10.E1 circuit remote loop and local loop tests.

11.Pseudo random sequence test, facilitating the test of E1 circuit.

12. Perfect circuit test and alarm indication.
13.CL-C1200L with LCD Display Support SNMP NMS, AC+DC Dual-power
14.CL-C1400 4*Ethernet support VLAN config,with SNMP NMS

CL-C1100 FE1/E1 to Eth Converter Panel:

CL-C1400/C1200 Panel:

CL-C1200 E1 to Ethernet Protocol Converter

CL-C1200L LCD SNMP Panel:

CL-C1400 E1 to Ethernet Protocol Converter

CL-C SNMP NMS GUI:

Specification:

Power	AC Input	220VAC(100~260V )
	DC Input	-48V DC(-32V~-72V)
	Power Consumption	≤3W
E1 interface	Data rate	N*64K Frame
	Code type	HDB3
	Compliant with G.703, G.704, G.706 and G.823 75/120 BNC (75ohm)/ RJ45 (120ohm)
Ethernet Interface	Standard	IEEE 802.3, 802.3u.10/100M electrical Port, MDI/MDIX auto negotiation, Half/ full duplex
Ethernet Interface	Qty	1/2/4 RJ45 connector
Environment	Operation Temperature	0~50
	Operation Relative Humidity	20~90%
	Store Temperature	-20~65
	Store Relative Humidity	10~95%

Application:

Solution:

FE1 V.35 Ethernet Fiber Modem Solution

FE1 V.35 Ethernet Fiber Modem Solution V1.2

Order Info.:

Model	Description
CL-C1100	E1 to 10/100M Base-T , 75/120ohm, Unframed(2M),AC220V or DC-48V
CL-C1101	E1 to 10/100M Base-Fx, 75/120ohm, Unframed(2M),AC220V or DC-48V
CL-C1200	E1 to 210/100M Base-T, 75/120ohm, (N64K) Framed/ (2M) Unframed, Support Vlan, AC+DC
CL-C1200L	E1 to 210/100M Base-T, 75/120ohm, (N64K) Framed/ (2M) Unframed, Support Vlan, LCD Display, SNMP NMS,AC+DC
CL-C1400	E1 to 410/100M Base-T, 75/120ohm(N64K) Framed/ (2M) Unframed, Support Vlan, SNMP NMS,AC220V or DC-48V(4 Ethernet ports Support Vlan and Switch Fun)

CuteLink Product

Your Location: Home >> CuteLink Products

CuteLink Products Catalog